CHEAPYDMA Firmware Flashing

1. 📦 Install CHEAPYDMA DMA Driver

👉 Make sure the CHEAPYDMA Driver (Download here) is installed on your 2nd PC.

  • Run DMA Driver.exe and press Install to complete the setup.
  • Ensure the DMA card is plugged into the JTAG USB-C port (left port) on the device.

2. 📥 Download CHEAPYDMA Flashing Tool

👉 Download the CHEAPYDMA Flashing Tool (Download here) on your 2nd PC.

3. ⚙️ Configure Tool Settings

In the tool, set the fields as follows:

  • Field 1: xc7a75t
  • Field 2: BIN
  • Field 3: 10000000

4. 📂 Select Firmware File

Click the button below the “FPGA” label and choose your .bin firmware file.

5. ▶️ Flash the Firmware

  • Press the Flash button (directly below firmware selection).
  • Wait until the process reaches 100% completion.

6. ✅ Confirm Success

  • Once the process completes and you see a success message, the flash was successful.
  • After flashing has reached 100%, reboot the MAIN PC.

🔄 Final Steps

  • Reconnect the DMA card to the DATA port (right port) for normal operation.
  • If you have issues, please request AnyDesk support or email cheapydma@gmail.com or join our Discord.

7. 🚀 Run a Speed Test

Run a Speed Test to confirm everything is working correctly.